One piece construction of factory assembled 16-gauge galvanized steel insures easy field installation.
Double doors provide customized access to the unit.
Positive lock door latches provide tight seals to door perimeters.
Corner gussets positioned on upstream side of system give added strength.
Air leakage is eliminated with fully gasketed doors and welded seams sealed with silicone compound.
Track systems are manufactured with positive seal woven nylon pile for ease in installation and a continuous seal for prevention of air bypass in the filter bank.
Installation flanges included. Customized upon request.
Type S Side Loading HEPA Housing
Factory assembled one-piece construction of 12 and 14 gauge galvanized steel.
All seams are welded or caulked to eliminate air leakage.
Housing can withstand up to ± 10" static pressure.
Crank lock mechanism creates positive gasket seal. Fluid seal models also available.
Housings allow easy access and removal of filters. Multiple filter configurations include a crank lock activation option.
Installation flanges are included. Customized upon request.
Technical PDF's:
HEPA Holding Frame
Constructed of 16-gauge galvanized steel.
Mechanically controlled production guarantees flush mitered/welded corners.
Sheared frame edges are deburred prior to assembly.
Frames have prepunched mounting holds for proper alignment and assembly.
Aluminum Ducted Hood Module
Constructed of .063" aluminum.
All seams are welded and caulked.
Butterfly damper provides optimum control of airflow balance.
Flush stainless steel grille removes easily and is secured with four acron nuts
The static pressure port allows easy access without disturbing the filter.
A 5/8" permanent trim flange is included. A removable trim flange is available for sheet rock or placer ceiling applications.
Technical PDF's:
Bag in, Bag out Systems
Factory assembled of 11 and 14-gauge stainless steel.
Seam welding reinforces joint strength and other points of pressure.
Reinforced to withstand up to 20" w.g., positive or negative.
Smooth air-inlet design limits the collection of contaminants and helps to avoid deterioration of fliters.
Removable access door on each filter level insures installation convenience and replacement safety.
Removable rods for housing with two or more filters are installed on one level pulling filters to an accessible, convenient changeout position.
Installation flanges included. Customized upon request.
Housing features a safety filter locking mechanism and a 12-gauge bolt driven lock, 1,400 lb. locking mechanism for gasket seal application.
